A reddish vertical line (smear) appears on the LCD monitor during
picture-taking.
This is a characteristic of CCDs, and it appears when the subject has a
•
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
It is recommended that you take pictures while taking care not to expose
•
the screen to sunlight or any other source of strong light.
Motion picture recording stops in the middle.
Are you using a MultiMediaCard? This unit does not support MultiMediaCards.
•
> When you set the picture quality to [
high-speed card with "10MB/s" or greater displayed on the package.
Depending on the type of the card, recording may stop in the middle.
•
Zoom does not operate properly
Is the [CONVERSION]
•
The subject cannot be locked. (AF track fails)
Set the AF area to the distinctive colour of the subject if there is a part that is different from the
•
surrounding colour.
(P127)
set to [
(P115)
Others
], [
] or [
], we recommend using a
]?
- 194 -