[Digital Zoom]; [Stabilizer] - Panasonic VQT1T63 Operating Instructions Manual

For details on [REC] mode menu settings, refer to P25.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[ON]
Note
Refer to P48 for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
•
set to [AUTO] or [MODE1].
For details on [REC] mode menu settings, refer to P25.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
[OFF]
[AUTO]: The optimum jitter compensation is selected depending on the condition.
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
Note
The stabilizer function may not be effective in the following cases.
•
When there is a lot of jitter.
–
When the zoom magnification is high.
–
In digital zoom range.
–
When taking pictures while following a moving subject.
–
When the shutter speed becomes slower to take pictures indoors or in dark places.
–
Be careful of camera jitter when you press the shutter button.
•
The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
•
[STARRY SKY] in scene mode.
In motion picture mode, [AUTO] or [MODE2] cannot be set.
•
Advanced (Recording pictures)

[DIGITAL ZOOM]

[STABILIZER]

- 122 -