Preventing Jitter (Camera Shake); Direction Detection Function; Enlarge The Focus Point At The Centre (Display Focus Point) - Panasonic VQT1T63 Operating Instructions Manual

When the jitter alert [
(P67).
Shutter speed will be slower particularly in the following cases. Keep the camera still from the
•
moment the shutter button is pressed until the picture appears on the screen. We recommend
using a tripod.
Slow sync./Red-eye reduction
–
In [NIGHT PORTRAIT], [NIGHT SCENERY], [PARTY], [CANDLE LIGHT], [STARRY SKY] or
–
[FIREWORKS] in scene mode
When the shutter speed is slowed in [MIN. SHTR SPEED]
–
Pictures recorded with the camera held vertically are played back vertically (rotated). (Only
when [ROTATE DISP.]
Pictures may not be displayed vertically if they were taken with the camera aimed up or down.
•
Motion pictures taken with the camera held vertically are not displayed vertically.
•

Enlarge the focus point at the centre (display focus point)

This unit will remember the focus point during the recording, and it can be enlarged with
that point as a centre.
Press [FOCUS] during image playback
Focus point may not be the centre of enlargement when it is
•
at the edge of the image.
Refer to Using the Playback Zoom
• "
during zooming.
It will return to the original enlargement if [FOCUS] is
•
pressed again during zooming.
Focus point is enlarged during zoom in auto review.
•
Following pictures cannot be enlarged because there is no focus point:
•
Picture that was taken without focusing
–
Picture that was taken with manual focus
–
Picture that was taken with a different camera
–

Preventing jitter (camera shake)

] appears, use [STABILIZER] (P122), a tripod or the self-timer
(P85)

Direction detection function

(P149) is set to [ON])
(P52)
"
- 42 -
Basic
for operation