[REC] mode:
Taking Pictures using the Built-in Flash
A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
Be sure to close the flash when not
•
in use.
The flash setting is fixed to [Œ]
•
while the flash is closed.
Set the flash to match the recording.
Open the flash.
•
1
Press 1 [‰].
2
Press 3/4 to select a mode.
You can also press 1 [‰] to select.
•
For information about flash settings that can be selected, refer
•
to
Available flash settings by recording mode
"
3
Press [MENU/SET].
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this time, the selected item is
•
automatically set.
Advanced (Recording pictures)
Switching to the appropriate flash setting
OPEN
.
(P61)
"
- 59 -