Panasonic VQT1T63 Operating Instructions Manual page 172

Ensure that the screw parts of the lens adaptor and the filter are properly tightened.
•
Note
Do not attach multiple filters at the same time.
•
If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.
•
If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the
•
camera.
Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus
•
may be adjusted to the lens, resulting in the subject being out of focus.
Refer to the instructions for each filter for details.
•
Turn off the camera when removing the filter.
•
MC u "Multi-coated"
•
ND u "Neutral Density"
Connecting to other equipment
- 172 -