Selecting A Single Picture And Printing It - Panasonic VQT1T63 Operating Instructions Manual

Note
Do not use any other USB connection cables except the supplied one. Use of cables other than
•
the supplied USB connection cable may cause malfunction.
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off, and disconnect the USB connection
•
cable.
You cannot switch between the built-in memory and the card while the camera is connected to
•
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneously
•
by the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed.
1 Press 2/1 to select the picture and then press
[MENU/SET].
The message disappears in about 2 seconds.
•
2
Press 3 to select [PRINT START] and then press
[MENU/SET].
Refer to P162
•
print the pictures.
Press [MENU/SET] to cancel printing halfway.
•
Disconnect the USB connection cable after printing.
•
Connecting to other equipment

Selecting a single picture and printing it

for the items which can be set before starting to
- 160 -
PictBridge
100 _ 0001 100 _ 0001
1/9 1/9
1/9 1/9
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
MENU
MULTI PRINT PRINT
SINGLE SELECT
PRINT START
PRINT WITH DATE OFF
NUM. OF PRINTS 1
PAPER SIZE
PAGE LAYOUT
MENU
CANCEL SELECT SET