Using The External Flash (Optional) - Panasonic VQT1T63 Operating Instructions Manual

Using the External Flash (optional)

After attaching the external flash, the effective range will be increased when compared to
the camera's built in flash.
Preparations: Turn off the camera and close the built-in flash.
∫ Using the dedicated flash (DMW-FL360; optional)
1
Attach the dedicated flash to the hot
shoe A and then turn on the camera and
the dedicated flash.
Be sure to firmly secure to dedicated flash with the
•
lock ring B.
2
Press 1[
‰
3
Press 3/4 to select a mode.
What screen will be displayed here depends on the flash
•
mode setting of the external flash unit
4
Press [MENU/SET].
While the external flash is connected, the following icons are
•
displayed.
/
/
∫ Number of pictures taken in burst mode when using external flash.
You can take up to 3 pictures by keeping the shutter button pressed down.
•
Burst speed
(pictures/second)
Number of recordable
pictures (pictures)
Depending on the extra flash you use or the recording conditions, you cannot take pictures in
•
this mode or the amount of light may become insufficient for the second or subsequent
pictures.
Connecting to other equipment
].
External flash active
External flash Forced OFF
[OFF]
—
—
[ ˜ ]
2.5
max. 3
- 173 -
[ ò ]
Approx. 2