Taking Pictures Using Burst Mode - Panasonic Lumix DMC-GF2 Operating Instructions Manual

Hide thumbs Also See for Lumix DMC-GF2:
Table of Contents

Advertisement

[REC] Mode:

Taking Pictures using Burst Mode

Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Press 4 (
Touch burst icon ([
Select and touch the burst speed.
Burst speed
(pictures/second)
Live View during Burst
Mode
With RAW files
¢1
Without RAW files Depends on the remaining capacity of the card
¢1 Number of recordable pictures
¢2 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
First burst speed has no relation with the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
The Burst Mode speed may become slower depending on the following settings.
[SENSITIVITY] (P98)/[PICTURE SIZE] (P130)/[QUALITY] (P131)/[FOCUS MODE] (P32)/
[FOCUS PRIORITY]
Burst speed can also be set with [BURST RATE] in [REC] menu.
Refer to
P131
for information about RAW files.
Recording
).
], etc.).
[H]
(High speed)
3.2
None
(P144)
- 79 -
[M]
(Middle speed)
(Low speed)
2.5
Available
¢2
4 to 7
[L]
2
Available
¢2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-gf2egDmc-gf2ecDmc-gf2eb

Table of Contents