For details on [REC] mode menu settings, refer to P25.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/[80]/[100]/[200]/[400]/[800]/[1600]/[3200]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
Note
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set
•
with [ISO LIMIT SET].
ISO sensitivity will adjust automatically depending on brightness within the maximum setting of
•
[ISO400] ([ISO1000] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].
The setting is not available when [INTELLIGENT ISO] is being used. ([
•
It is recommended to set the ISO sensitivity lower, adjust the [NOISE REDUCTION] under
•
[FILM MODE] toward the positive side, or adjust the setting for each of the items other than
[NOISE REDUCTION] toward the negative side if the noise is predominant.
For details on [REC] mode menu settings, refer to P25.
Most appropriate sensitivity within the range set will be set depending on the brightness of
the subject.
Applicable modes:
[AUTO]/[200]/[400]/[800]/[1600]/[3200]
Note
The upper limit of the ISO sensitivity can be set.
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
•
amount of picture noise.
It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].
•
Advanced (Recording pictures)
[SENSITIVITY]
80
When it is light (outdoors)
Slow
Less
[ISO LIMIT SET]
- 109 -
3200
When it is dark
Fast
Increased
] is displayed.)
(P103)