Resetting The File Number - Panasonic Lumix DMC-LC33 Operating Instructions Manual

Resetting the File Number

1,6 2,3,4,5
3
REC
BEEP
NO.RESET
RESET
CLOCK SET
SELECT SET
4
NO.RESET
RESET FILE NO.
IN THE CAMERA?
YES
SELECT
Technical use
As the file numbers are recorded sequentially
by the camera, when you use two or more
cards, it may happen that the file numbers on
your cards do not start from 0001.
Use this function when you insert a new card
or perform the new recording on the recorded
card and you want to start recording from the
file number 0001.
[Preparation]
• Set the mode dial except for [
(P22)
1
Press the [MENU] button.
SETUP 2/3
2
Press 1 to open the setup menu.
3
Press 3/4 to select [NO.RESET] and
then press 1.
4
When this message is displayed
"RESET FILE NO. IN THE CAMERA?",
EXIT
MENU
press 2 to select [YES].
5
Press the 4/[REVIEW/SET] button.
6
Press the [MENU] button.
• The menu will disappear.
NO
SET
76
]/[ ].