Table of Contents
Advertisement
Chapter
24
System settings
p If you set multiple function keys to the
same steering wheel key, only the last one
you set is enabled.
p If you make a mistake after connecting this
product with the supplied wired remote
cable, please reset it.
p In some cases this function may not work
correctly.
For details please contact your dealer or an
authorised Pioneer Service Station.
For steering wheel control
adapter for Pioneer users
1
Press the HOME button to display the
Top menu screen.
2
Touch the following keys in the follow-
ing order.
The "System" screen appears.
3
Touch [Steering Wheel Control].
The "Steering Wheel Control" screen ap-
pears.
4
Touch [With Adapter].
The completion message appears.
5
Touch [OK].
The "System" screen appears.
For users directly connecting
this product to the vehicle's
steering wheel control harness
1
Press the HOME button to display the
Top menu screen.
116
Engb
2
Touch the following keys in the follow-
ing order.
The "System" screen appears.
3
Touch [Steering Wheel Control].
The "Steering Wheel Control" screen ap-
pears.
4
Touch [Without Adapter].
The "Steering Wheel Control" screen ap-
pears.
5
Touch [Clear].
A message confirming whether to clear all key
settings appears.
p You must clear all default settings before
you use this function.
6
Touch [Clear].
All key settings are cleared.
7
Touch the following key.
Press to cycle through all the avail-
able sources.
Source
Press and hold to turn the source
off.
Press to mute.
Press again to unmute.
Press to increase or decrease the
volume.
Press to attenuate the sound.
ATT
Press again to cancel.
Press to return to the previous
track (chapter).
Advertisement
Table of Contents
