About Steering Remote Control - Pioneer AVIC-Z1 Operation Manual

— When [AUX Input] (auxiliary input) is set to
[Off].
— When [AV Input] (video input) is not set to
[Video].
❒ The term "external unit" refers to future Pio-
neer devices that are not currently planned
for, or although devices are not fully con-
trolled by this navigation system, devices
enable control of basic functions. Two exter-
nal units can be controlled by this navigation
system. When two external units are con-
nected, the navigation system allocates them
to external unit 1 or external unit 2.
❒ When the [Auto ANT] mode is set to
[Radio], the vehicle's antenna can be stowed
by following the instructions below.
— Change the source from radio (AM or FM)
to another source.
— Turn the source off.
— Turn off the ignition switch (ACC OFF).
If the [Auto ANT] mode is set to [Power], the
vehicle's antenna can be stowed only when
the ACC is set to "OFF".
➲ [Auto ANT] ➞ Page 156

About Steering Remote Control

❒ If you operate using the "CD-SR1" Steering
Remote Control (sold separately), the follow-
ing buttons can be used for operation:
PHONE MENU button
Switches to Phone menu when Bluetooth unit
(sold separately ) is connected.
VR ACTIVATION / OFF HOOK button
Press to accept the call when there is an incom-
ing call.
In other situation, press to start the voice opera-
tion.
VR CANCEL / ON HOOK button
Press to reject a call when there is an incoming
call.
Press to hang up the phone during talking on the
phone.
In voice operation, return to the previous screen.
100
button:
Same function as P.LIST ( / ) button.
button:
Same function as TRK ( / ) button.
+, - button:
Same function as VOL ( / ) button.
BAND button:
Same function as [Band] touch key.
SOURCE button:
Same function as AV button.