Pioneer AVIC-F60BT Operation Manual page 139

Audio adjustments
2 Fix the microphone for acoustical mea-
surement in the centre of the headrest of
the driver's seat, facing forward.
The Auto EQ may differ depending on where
you place the microphone. If desired, place
the microphone on the front passenger seat
and perform Auto EQ.
3 Disconnect the iPhone or smartphone
device.
4 Turn on the ignition switch (ACC ON).
If the vehicle's air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
Switch the AV source to "OFF".
5
= For details of the operations, refer to Dis-
playing the AV operation screen on page 20.
6 Press the HOME button to display the
Top menu screen.
7 Touch the following keys in the follow-
ing order.
The "Audio" screen appears.
8 Touch [A-EQ&TA Measurement].
The "A-EQ&TA Measurement" screen ap-
pears.
9 Connect the microphone for acoustical
measurement with this product.
Plug the microphone into the microphone
input jack on this product.
10 Touch [Front Left] or [Front Right] to se-
lect the current listening position.
11 Touch [Start].
A 10-second countdown starts.
p The Bluetooth connection is disconnected
before the process starts.
12 Exit the vehicle and keep the doors
closed until the countdown finishes.
When the countdown finishes, a measure-
ment tone (noise) is emitted from the speakers
and the Auto EQ measurement begins.
13 Wait until the measurement is com-
pleted.
When Auto EQ is completed, a message is dis-
played indicating that the measurement is
completed.
p If the vehicle's acoustics cannot be mea-
sured correctly, an error message will be
displayed.
p The measurement time varies depending
on the type of vehicle.
p To stop the measurement, touch [Stop].
14 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, colour change or
malfunction.
Chapter
25
139
Engb