Adjusting The Picture - Pioneer AVIC-F60BT Operation Manual

Chapter
24 System settings
p Do not turn off the engine while saving the
adjusted position data.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Touch panel calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen along
the arrows, and then touch the centres of
two + marks at the same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
The following screen appears.
Proceed to 16-point adjustment.
# If you press and hold the HOME button, the
adjustment is cancelled.
7 Gently touch the centre of the + mark
displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi-
tion data is saved.
# If you press the HOME button, the previous
adjustment position returns.
# If you press and hold the HOME button, the
adjustment is cancelled.
8 Press and hold the HOME button.
The adjustment results are saved.
124
Engb

Adjusting the picture

You can adjust the picture for each source and
rear view camera.
CAUTION
For safety reasons, you cannot use some of these
functions while your vehicle is in motion. To en-
able these functions, you must stop in a safe
place and apply the handbrake. Refer to Impor-
tant Information for the User (a separate man-
ual).
1 Display the screen you wish to adjust.
2 Press the HOME button to display the
Top menu screen.
3 Touch the following keys in the follow-
ing order.
The "System" screen appears.
4 Touch [Picture Adjustment].
The following screen appears.
5 Touch any of the following keys to se-
lect the function to be adjusted.
Picture adjustment items are displayed.
! Brightness:
Adjusts the black intensity.
! Contrast:
Adjusts the contrast.
! Color:
Adjusts the colour saturation.
! Hue:
Adjusts the tone of colour (which colour is
emphasised, red or green).
! Dimmer:
Adjusts the brightness of the display.