About Steering Remote Control - Pioneer AVIC-HD3II Operation Manual

Chapter
11 Using the AV Source (Built-in DVD Drive and Radio)
p In the following cases, the sound source
cannot to be used:
— When a unit corresponding to each
source is not connected to the naviga-
tion system.
— When no disc is set in the navigation
system.
— When no magazine is set in the multi-
CD player.
— When [AUX Input] is set to [Off].
= For details, refer to Switching the aux-
iliary setting on page 134
— When [AV Input] is not set to [Video].
= For details, refer to Setting the video
input on page 134
p The term "external unit" refers to future
Pioneer devices that are not currently
planned for, or devices that allow control of
basic functions although they are not fully
controlled by the navigation system. Two ex-
ternal units can be controlled by this navi-
gation system. When two external units are
connected, the navigation system allocates
them to external unit 1 or external unit 2.
p When [Auto ANT] mode is set to[Radio],
the vehicle's aerial can be stowed or turned
off by following the instructions below.
— Change the source from radio (AM or
FM) to another source.
— Turn the source off.
— Turn off the ignition switch (ACC OFF).
If [Auto ANT] mode is set to [Power], the
vehicle's aerial can be stowed or turned off
only when the ACC is set to "OFF".
= For more details about "[Auto ANT]",
refer to Switching the auto aerial setting on
page 135

About Steering Remote Control

p When using "CD-SR1" Steering Remote
Control (sold separately), the following but-
tons can be used for operation:
PHONE MENU button
Switches to Phone menu when Bluetooth unit
(sold separately) is connected.
86
Engb
VR ACTIVATION / OFF HOOK button
Press to accept the call when there is an in-
coming call.
In other situations, press to start the voice op-
eration.
VR CANCEL / ON HOOK button
Press to reject a call when there is an incom-
ing call.
Press to hang up the phone during talking on
the phone.
In voice operation, return to the previous
screen.
a b button:
Same function as P.LIST (a/b) button.
c d button:
Same function as TRK (c/d) button.
+, – button:
Same function as VOL (b/a) button.
BAND button:
Same function as [Band] touch panel key.
SOURCE button:
Same function as AV button.