Watching The Simulation Of The Route - Pioneer AVIC-F60BT Operation Manual

Chapter
06 Checking and modifying the current route
4 Touch any of route information to see
its details.
The following pieces of information are dis-
played:
! The name and/or address of the destina-
tion.
! The total time of the route.
! The total length of the route.
The following options are available:
! Route Info:
Displays detailed information about the
route. There are also additional icons for
displaying all detailed information, only mo-
torways, and only toll roads.
! Alternatives:
Lists the route alternatives.
Watching the simulation of the
route
You can run a simulated navigation that de-
monstrates the current route. Follow the steps
below.
1 Set a route to your destination.
= For details, refer to Chapter 5.
2 Press the MAP button.
The Map screen appears.
3 Touch the following key.
4 Touch [Route Summary].
The "Route Summary" screen appears.
5 Touch the following key.
6 Touch [Simulation].
The simulation starts from the starting point of
the route, and using a realistic speed, it leads
you through the whole recommended route.
42
Engb
Displays the navigation menu on
the Map screen.
Displays the list of additional fea-
tures on the certain screen.
p During simulation, you can use the follow-
ing control keys (they disappear after a few
seconds but you can open them again by
touching the map).
Jumps to the previous gui-
dance point (manoeuvre).
Pauses the simulation.
Jumps to the next guidance
point (manoeuvre).
Increases the speed of the si-
mulation to four, eight or 16
times faster. Touching the key
again returns to the normal
speed.
# Touch [Close] to stop the simulation.