Table of Contents
Advertisement
Using the radio
Starting procedure
1
Display the AV source selection screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 20.
2
Touch [Radio] on the AV source selec-
tion screen.
The "Radio" screen appears.
3
Use the touch panel keys on the screen
to control the radio.
= For details, refer to Using the touch panel
keys on page 70.
Selecting a band
% Touch the following key repeatedly
until the desired band appears.
Switches between the following FM
bands: FM1, FM2 and FM3.
Switches to AM band.
p This function is convenient for preparing
different preset lists for each band.
Manual tuning
% Touch the following keys to tune manu-
ally.
Moves down one step at a time.
Moves up one step at a time.
p This function is convenient for preparing
different preset lists for each band.
Seek tuning
% Touch and hold one of the following
keys for about one second and then re-
lease.
Scans frequencies until it finds a broad-
cast strong enough for good reception.
You can cancel seek tuning by touching
either key briefly.
If you keep holding either key, you can
skip broadcasting frequencies. Seek
tuning will start when you release the
key.
Selecting a preset channel
from the preset channel list
Once you have stored broadcast channels,
you can easily recall preset channels from
memory with a single touch of a key.
= For details, refer to Storing broadcast fre-
quencies on page 72.
1
Touch the preset channel list display
key.
1
1 Preset channel list display key
Touch the item on the list ("1" to "6") to
2
switch to a channel registered as a preset
channel.
p If you touch the preset channel list display
key while the preset channel list is dis-
played, the list disappears and the preset
tuning keys are displayed.
Chapter
13
71
Engb
Advertisement
Table of Contents
