Editing The List Of Destinations - Pioneer AVIC-F60BT Operation Manual

Chapter
06 Checking and modifying the current route
4 Touch [Current GPS Position].
The pop-up menu appears.
5 Touch [Set Start Point].
A confirmation message appears.
6 Touch [Set Start Point].
The "Change Start to..." screen appears.
7 Set the starting point of the route.
= For details, refer to Chapter 5.
8 Touch [Set Start Point].
The "My Route" screen appears.
You can continue and add a destination to
your route.
9 Touch [Show Route].
After a short summary of the route para-
meters, a map appears showing the entire
route. The route is automatically calculated.
p If the current route already existed, it is now
recalculated starting from the selected lo-
cation.
10 Touch [Start Navigation].
Your navigation system starts the route gui-
dance with a transparent arrow mark (showing
that there is no GPS reception).
p If needed, you can select from different
route alternatives or change the route plan-
ning method before starting navigation.
= For details, refer to Checking route alter-
natives when planning the route on page
39.
p Touch [Continue navigation] to return nor-
mal navigation.
40
Engb

Editing the list of destinations

You can edit the route by modifying the list of
destinations (adding a waypoint, or changing
a final destination, for example).
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [My Route].
The "My Route" screen appears.
4 Edit the route by modifying the list of
destinations.
p To add the newly selected location as a way-
point to your route, touch [Add Waypoint].
If you have a route with at least one way-
point, you can delete it from the list right
from the navigation menu.
p To edit the route, touch a location from the
list. You can move up or down the given
route point in the list, and change the newly
selected destination at the end of the route.
p To save or delete a location, touch the loca-
tion on the list.
p To delete all the destinations, touch
then [Delete All].
5 When you are done editing, touch
[Show Route].
After a short summary of the route para-
meters, a map appears showing the entire
route. The route is automatically calculated.
6 Touch [Start Navigation].
A map of the current position appears.
,