Table of Contents
Advertisement
Chapter
24
System settings
! The range projected by the rear view camera
is limited. Also, the vehicle width and distance
guidelines displayed on the rear view camera
image may differ from the actual vehicle
width and distance. (The guidelines are
straight lines.)
! The image quality may deteriorate depending
on the usage environment, such as at night or
in dark surroundings.
1
Park your vehicle in a safe place and
apply the handbrake.
2
Using packing tape or similar, place
markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.
2 m
Markings
Markings
3
Press the HOME button to display the
Top menu screen.
4
Touch the following keys in the follow-
ing order.
The "System" screen appears.
5
Touch [Camera settings].
The following screen appears.
122
Engb
50 cm
25 cm
25 cm
Rear bumper
6
Touch [Parking assist guide adjust].
The following screen appears.
7
Set the guidelines by dragging the four
points.
8
Touch the following keys to adjust the
position of the point if necessary.
Moves the point to the left.
Moves the point to the right.
Moves the point upward.
Moves the point downward.
Extends the line to the left and right
from the current centre point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Shortens the line from the left and right
to the current centre point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Resets the settings of the distance and
Default
vehicle width guidelines and adjust-
ment points to the default.
p When a point is moved, the distance from
the initial value is displayed at the bottom
of the screen.
Turning off the demo screen
If the demo screen appears, perform the fol-
lowing procedure to turn off the demo screen.
Advertisement
Table of Contents
