Interface Settings - Canon image RUNNER 3245 Getting Started Manual

Interface Settings

This section describes how to specify the interface settings from the control panel. If you are
configuring the settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of
the machine. For details, see e-Manual > Network.
1
On the Network Settings screen, press [Change Settings/Display
Connection Confirm.] → specify the following.
[On]: If errors related to network connections occur, an error message is displayed on the touch panel
display of the machine. If you want to use the machine in a network environment, select [On].
[Off ]: Messages related to network connections are no longer displayed. If you want to use the machine
without connecting to a network, select [Off ].
Even if you switch the [Change Settings/Display Connection Confirm.] setting from 'On' to 'Off' , if the
network connections are correctly set they will not be disconnected. The settings in the Network Settings
screen will not be changed.

Interface Settings

4-9
4