Figure 10-21 Ftp Session Example - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Step 2. Type open and the IP address of your Prestige.
Step 3.
You may press the [ENTER] when prompted for a username.
Step 4.
Type root and your SMT password as requested. The default is 1234.
Step 5.
Type bin to set transfer mode to binary.
Step 6. Use "put" to transfer files from the workstation to the Prestige, e.g., put p642.bin ras
transfers the firmware on your computer (p642.bin) to the Prestige and renames it "ras".
Similarly put p642.rom rom-0 transfers the configuration file on your computer
(p642.rom) to the Prestige and renames it "rom-0". See section 10.4 for more information on
filename conventions.
Step 7. Type quit to exit the ftp prompt.
Connected to 312.x.x.x
220 P312 FTP version 1.0 ready at Thu Jan 20 18:00:02 2000
User (312.x.x.x:(none)): <Enter>
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> put p312e.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit
The following table describes some of the fields that you may see in third party FTP clients.
Table 10-7
Host Address
Login Type
Transfer Type
10-18
Figure 10-21 FTP Session Example
The system reboots after a successful upload.
Third Party FTP Clients –General fields
Enter the address of the host server.
•
Anonymous.
This is when a user I.D. and password is automatically
supplied to the server for anonymous access. Anonymous
logins will work only if your ISP or service administrator has
enabled this option.
•
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary
System Maintenance