Table 5-1 Tcp/Ip Related Fields In Remote Node Profile; Table 5-2 Tcp/Ip Remote Node Configuration - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Table 5-1
Field
Route Make sure IP is among the protocols in the [Route] field in
Menu 11.1 - Remote Node Profile.
Enter the IP address of the remote gateway in Menu 11.1 -
Rem IP Address
Remote Node Profile. You must fill in either the remote
Prestige WAN IP address or the remote Prestige LAN IP
address. This depends on the remote router's WAN IP i.e., for
the (remote) Prestige, the My WAN Addr settings in Menu
11.3 – Remote Node Network Layer Options). For example
if the remote WAN IP is set to 172.16.0.2 (the remote router's
WAN IP), then you should enter 172.16.0.2 in the Rem IP
Address field. If the remote WAN IP is 0.0.0.0, then enter
192.168.1.1(the remote router's LAN IP) in the Rem IP
Address field).
Press the [SPACE BAR] to toggle this field to Yes and then
Edit IP
press [ENTER] to go to Menu 11.3 - Remote Node Network
Layer Options menu.
The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer
Options.
Table 5-2
Field
VPI Enter the Virtual Path Identifier (VPI) number that your
telephone company supplies.
VCI Enter the Virtual Channel Identifier (VCI) number that your
telephone company supplies.
Rem IP Address This will show the IP address you entered for this remote node in
the previous menu.
Rem IP Subnet Enter the subnet mask for the remote network.
Mask
My WAN Addr Some implementations, especially the UNIX derivatives, require
the WAN link to have a separate IP network number from the
LAN and each end must have a unique address within the WAN
network number. If this is the case, enter the IP address
assigned to the WAN port of your Prestige.
Note that this is the address assigned to your local Prestige
WAN, not the remote router. If the remote router is a Prestige,
then this entry determines the local Prestige Rem IP Address in
5-4
TCP/IP related fields in Remote Node Profile
Description
TCP/IP Remote Node Configuration
Description
(Yes/No)
Remote Node TCP/IP Configuration
Option
IP
Yes
Option