Figure 5-6 Menu 12 - Static Route Setup - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
Each remote node specifies only the network to which the gateway is directly connected, and the Prestige
has no knowledge of the networks beyond. For instance, the Prestige knows about network N2 in the
following diagram through remote node Router 1. However, the Prestige is unable to route a packet to
network N3 because it doesn't know that there is a route through remote node Router 1 (via Router 2). The
static routes are for you to tell the Prestige about the networks beyond the remote nodes.
Figure 5-5
To configure an IP static route, use Menu 12.1 – IP Static Route Setup. Follow this procedure.
Step 1. Enter 12 from the main menu to bring up the following screen.
Step 2. From Menu 12, enter 1 to bring up the next screen.
5-6
Example of Static Routing Topology
Menu 12 - Static Route Setup
1. IP Static Route
2. IPX Static Route
3. Bridge Static Route
Please enter selection:
Figure 5-6 Menu 12 – Static Route Setup
Remote Node TCP/IP Configuration