Table of Contents
Advertisement
7.4 LEDs
There are only two LEDs on the front of the display panel, but they are worth watching, if you
experience trouble.
LED
Standby
Source LED
IR Activity
IR Remote
Sensor
Standby LED
Good Source LED
IR Activity LED
On / Standby
Switch
7 - 12
LEDs on Front of Display Panel
LEDs in upper left corner of display front panel
Meaning
Flashes during a "lock-out" period as the electronics goes
through its initialization procedures.
Stays on steady when unit is waiting for an ON command.
Off when display is on.
Lights when the Selected Source has a valid signal. Off
when the source is not valid or absent.
Flashes whenever infra-red radiation is detected, whether
from the remote control or from some other source.
Strong, steady illumination of this LED means external,
stray IR radiation is present and may interfere with remote
control signals.
Advertisement
Table of Contents
