1. Manuals
  2. Brands
  3. Clarity Manuals
  4. Monitor
  5. Bengal SN-6010-720
  6. User manual

Clarity Bengal SN-6010-720 User Manual

60" video display unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Bengal
SN-6010-720

User Guide

Advertisement

Table of Contents
loading

Related Manuals for Clarity Bengal SN-6010-720

Summary of Contents for Clarity Bengal SN-6010-720

  • Page 1: User Guide

    Bengal SN-6010-720 User Guide...
  • Page 3 SN-6010-720 Bengal 60" Video Display Unit User Guide 070-0147-01 19 October 2004...
  • Page 4 IMITED ARRANTY . Clarity warrants to Buyer that the SN-6010-720 (the “Product”), if properly used and serviced, will perform substantially in accordance with the product data sheet and users manual, and will be...
  • Page 5 In no event will Clarity be liable to buyer or any other party for procurement costs, loss of profits, loss of use, or for any other incidental, consequential, indirect or special damages or for contribution or indemnity claims, however caused.
  • Page 7 Feedback About Manuals , is constantly striving to provide the best product available at a reasonable cost. Part of this Clarity prod- uct is the manual. If you have found an error in this manual, or if you would like to make any comments about it, you may use this form.

  • Page 9: Table Of Contents

    Contents 1 Introduction … 1 1.1 About the Bengal … 2 1.2 Accessories for Bengal … 4 1.3 Using the Remote Control … 6 1.4 Your Safety is Important … 8 2 Installation … 11 2.1 What You Will Do … 12 2.2 Unpacking the Bengal …...
  • Page 10 3.6 Saving Your Work and Recalling a Memory … 42 4 Operating … 45 4.1 Normal Start Up … 46 4.2 Reading the Alpha Numeric Display … 48 4.3 Controlling Bengal with Remote … 50 4.4 Controlling Bengal with RS232/RS485 … 52 5 Maintenance …...

  • Page 11: Introduction

    1 Introduction About the Bengal … 2 Accessories for Bengal … 4 Using the Remote Control … 6 Your Safety is Important … 8...

  • Page 12: About The Bengal

    1.1 About the Bengal is a 61" rear-projection display in a native 16x9 format, designed to outperform large Clarity Bengal format plasma displays. It combines ultra-thin (6.5" deep) rear projection, DLP technology and rugged reliable design for outstanding performance in digital signage applications.

  • Page 14: Accessories For Bengal

    1.2 Accessories for Bengal The accessory kit for the contains the following items. Bengal Each Bengal comes with (quantity) • AC power cable (1) • VGA cable (1)DB9F to RJ45 Adapter (1) • 8-32x3/8 Pan Head Phillips #2 screw (4) •...
  • Page 15 Wall Mounting Bracket Lower Retaining Bracket VGA Cable T-25 L-Key Torx Wrench Remote Control 8-32x3/8 pan head screws Removable I/O Cover Power Cable...

  • Page 16: Using The Remote Control

    1.3 Using the Remote Control Most original setup operations are performed with the remote control. Later, RS232 control may be used. The remote control, shown below, lets you control the Bengal and get it setup and adjusted initially. For a complete description of remote control func- tions.

  • Page 18: Your Safety Is Important

    1.4 Your Safety is Important produces UV (ultra-violet) radiation (internally), and some parts are very hot. For your con- Bengal tinued health and safety we strongly suggest you read this section carefully. The fully assembled display weighs about 106 lb. •...

  • Page 21: Installation

    2 Installation What You Will Do … 12 Unpacking the Bengal … 14 Installing the Bengal … 16 Connecting Source Cables … 18 Connecting RS232/RS485 Cables … 20...

  • Page 22: What You Will Do

    2.1 What You Will Do This is an overview of the entire installation and setup process. The numbers in parentheses are page numbers in this User Guide where more detailed information is available. Installation 1. Unpack the Bengal carefully (14). 2.

  • Page 24: Unpacking The Bengal

    2.2 Unpacking the Bengal To avoid damaging the during unpacking, it is advisable to read this section carefully. Bengal 1. Remove the plastic plugs on either 2. Open the box top and find the accessories side of the bottom of the box. inside.

  • Page 26: Installing The Bengal

    2.3 Installing the Bengal is meant to be installed on a wall or on an optional stand. It is not designed to sit on its Bengal own. Introduction The Bengal can be attached to a wall or to an optional stand. Hardware for mounting is provided in the accessory kit.
  • Page 27 Installing the Lower Retaining Bracket The lower retaining bracket is not designed to hold the weight of the display. Its function is to hold the bottom of the display securely to the mounting surface and to allow adjustment of the display to insure perpendicu- larity.

  • Page 28: Connecting Source Cables

    2.4 Connecting Source Cables All of the signal inputs are on input modules housed in an electronic cage assembly accessible Bengal from the left side of the Bengal Analog and Digital Connectors There is one analog 15-pin VGA type connector and one standard DVIconnector as data inputs to the Bengal.
  • Page 29 Data Inputs Video Inputs Bengal Signal Input Panel, Left Side View Control Inputs and Loop-thru Audio Inputs and Outputs...

  • Page 30: Connecting Rs232/Rs485 Cables

    2.5 Connecting RS232/RS485 Cables With serial control, you can control one or several s at the same time. Bengal Bengal Connect to the computer problems try terminating the last display by going to Connect the Bengal to the serial out port of a com- >...

  • Page 31: Adjusting

    3 Adjusting Aligning the Image … 22 Adjusting Bengal To Its Source … 26 3.2.1 Adjusting to Computer Sources … 28 3.2.2 Adjusting Frequency and Phase … 30 3.2.3 Adjusting to Computer Sources, Digital … 32 3.2.4 Adjusting to Video Sources … 34 What Does Colorspace Mean? …...

  • Page 32: Aligning The Image

    3.1 Aligning the Image Aligning the image will probably not be necessary. However should there a be a slight misalignment, it is important that you do this before you use the Position controls. Adjust the image so that it covers the entire screen.
  • Page 33 Loosen screw #1 to widen the bottom of the image. To access the adjustments on the small mirror, remove two screws under the center access panel and remove the panel. Loosen screws #2 and #3 to widen the top of the image. Small mirror showing three image adjustment screws If initial inspection shows that the image is Adjust screw #3 to square up the top...
  • Page 34 Aligning the Image continued Bowing Because the screen is so large, there is a certain degree of flexibility in the screen that can cause bowing at the top of the image. There are three screws in the top of the screen that are adjustable.
  • Page 35 Aligning the Image continued Electronic Alignment Once the initial alignment adjustments are com- pleted, you can touch up the edges by accessing the menu. MAGE LIGNMENT Follow the menu path on the right to open the Image Alignment menu. In the Image Alignment menu select .

  • Page 36: Adjusting Bengal To Its Source

    3.2 Adjusting Bengal To Its Source The source picture—from computer, video, DVD—is variable and does not always conform exactly to a standard. has a way to compensate for this. Bengal Connections What does Input Level do? The Bengal has 3 computer sources: analog 1, ana- For analog computer sources adjusting to the com- log 2 and digital.

  • Page 38: Adjusting To Computer Sources

    3.2 Adjusting Bengal To Its Source 3.2.1 Adjusting to Computer Sources The best way to adjust levels is the semi-automatic method. Adjusting levels semi-automatically Adjusting levels completely automatically This is quick and easy if you can get a black pic- Open the menu and check D AUTO SETUP OPTIONS...

  • Page 40: Adjusting Frequency And Phase

    3.2 Adjusting Bengal To Its Source 3.2.2 Adjusting Frequency and Phase The automatic adjustment for Frequency and Phase is usually good enough. (See 3.2.1 “Adjusting to Computer Sources” on page 28) If automatic adjustment is not good enough, this is how to do it man- ually.

  • Page 42: Adjusting To Computer Sources, Digital

    3.2 Adjusting Bengal To Its Source 3.2.3 Adjusting to Computer Sources, Digital Digital sources do not normally need adjustment, The controls for adjustment are provided for quali- fied service technicians. These controls are advance level controls and should not be adjusted unless you have been briefed by the factory or are familiar with black level adjustments.
  • Page 43 This form of the Input Levels menu appears when the current source is Digital and the colorspace is RGB. This form of the Input Levels menu appears when the current source is Digital and the colorspace is YPbPr.

  • Page 44: Adjusting To Video Sources

    3.2 Adjusting Bengal To Its Source 3.2.4 Adjusting to Video Sources Video adjustments are quite a bit like the controls on a television receiver. Adjusting the picture 6. If the color bar pattern has a pluge, you can use it to adjust Brightness.
  • Page 45 Saturation Match Match these these Adjust Saturation so the outside bars match when Blue Only is checked. Match Match these these Adjust Hue so the inside bars match when Blue Only is checked.

  • Page 46: What Does Colorspace Mean

    3.3 What Does Colorspace Mean? There are many ways to represent a color picture electronically. and YPbPr are the two most com- mon in analog and digital sources. The display will accept either. What does colorspace mean? Note: For DVD players outputting component video, There are two types—...
  • Page 47 This diagram shows the difference between the RGB and YPbPr signals or waveforms. It is not nec- essary to completely understand these waveforms. Bengal However, it should be clear that if the is set for one type, say RGB, and the signal is of the other Bengal type (YPbPr), the would process the color...

  • Page 48: Color Balancing Bengal

    3.4 Color Balancing Bengal Color Balancing can be done before or after Input Levels. The object of color balancing is to make individual Always use the internal Test Patterns for color units show the same colors. If we have more than one balancing, not an external pattern.
  • Page 49 13. Match brightness first. Move the selector arrow to Bengal has a feature that allows a boost in the White Balance – All. whites. When this is on, Color Balance will become • With the left key, reduce the brightness until more difficult but will allow for brighter whites.

  • Page 50: Scaling And Cropping

    3.5 Scaling and Cropping Sometimes the picture does not fit the display.The aspect ratio of the is 1.77 (16x9), the same as Bengal HDTV. The aspect ratio of a picture is its width divided by its height. 1280 ÷ 720 = 1.77 The effective resolution of the Bengal display (i.e.
  • Page 51 Justify determines how the picture will be placed on the screen. • If the picture is too wide for the display, and is cropped on the sides, you can choose ENTER IGHT • If the picture is too tall for the display and is cropped top and bottom, you can choose OTTOM Overscan.

  • Page 52: Saving Your Work And Recalling A Memory

    3.6 Saving Your Work and Recalling a Memory Some saving is done automatically, but there are big advantages to saving your work manually. There is more information about memories starting on page 69. How automatic save works How to recall a memory slot Whatever changes you make with the remote con- 1.
  • Page 53 ENTER ENTER...

  • Page 55: Operating

    4 Operating Normal Start Up … 46 Reading the Alpha Numeric Display … 48 Controlling Bengal with Remote … 50 Controlling Bengal with RS232/RS485 … 52...

  • Page 56: Normal Start Up

    4.1 Normal Start Up Start up sequence When AC power is turned on (using the orange toggle switch on the electronics cage), it seems that nothing happens for a few seconds. The electronics module is starting up and initializing itself.. Next, the alpha numeric display on the left front of the unit will display the message .

  • Page 58: Reading The Alpha Numeric Display

    4.2 Reading the Alpha Numeric Display The Alpha Numeric Display provides information on the status of the including failure informa- Bengal tion in case the unit should not operate properly. The Alpha Numeric Display is an LCD panel located The second line in the display contains the active on the bottom left of the Bengal.

  • Page 60: Controlling Bengal With Remote

    4.3 Controlling Bengal with Remote You can control with the remote control or with RS232 commands. Bengal Remote control The remote control projects a series of IR (infra- red) pulses to the Bengal for control. Aim the remote control at the screen and press .

  • Page 62: Controlling Bengal With Rs232/Rs485

    4.4 Controlling Bengal with RS232/RS485 Connect the RS232 In to the computer. Loop thru with RS485. Remote control with serial commands is a good way to control a Bengal while it is operating. It’s also an easy way to control Bengals during initial setup using a control program.

  • Page 65: Maintenance

    5 Maintenance Changing a Lamp … 56 Changing the Air Filter … 58 Cleaning the Screen … 60...

  • Page 66: Changing A Lamp

    5.1 Changing a Lamp You will need a slot head screwdriver for this procedure. What is meant by median lamp life? 2. Turn off the AC power switch underneath the sig- Lamp life is the median life of a large sample of nal input panel on the back-left of the Bengal and lamps.
  • Page 67 7. Slide the new lamp into place and tighten the cap- tive screw. Order a spare lamp to replace the one that was used. 8. Replace the access panel. Resetting the lamp hours It is a good idea to reset the lamp hours to zero when you install a new lamp.

  • Page 68: Changing The Air Filter

    If new construction occurs in the vicinity of the Clarity displays, watch out. New construction usually means DUST. Changing the Filter 1. Turn off the lamp and wait till the lamp cools down.The display status readout on the front of...

  • Page 70: Cleaning The Screen

    5.3 Cleaning the Screen Dirt is everywhere, and unless the displays you ser- lint free, paper towels are generally available at auto vice are in a super-clean room, from time to time you parts stores, home fix-it stores, and hardware stores. will have to clean the screens, mirrors and lens of the Cheesecloth is another good choice.

  • Page 71: Reference Section

    6 Reference Section Remote Control Functions … 62 Menus Structures: … 66 Analog Mode Tables … 88 Bengal Drawings … 96 Connector Wiring … 98 Regulatory Information … 102 Meaning of Terms … 104 Specifications for Bengal … 106...

  • Page 72: Remote Control Functions

    6.1 Remote Control Functions The next four pages explain the actions of the remote control Turns the lamp on and off. See 3.1 “Aligning the Image” on page 22.
  • Page 73 Starts the process of scanning the input connectors for the next available source. See ”Saving Your Work and Recall- ing a Memory” on page 42...
  • Page 74 Turns the curtain on and off. Curtain pattern is selected in the Miscellaneous menu. See page 79 Displays this message and starts the process of adjusting Mute mutes the audio the image; performs those steps checked in the Auto Setup Options menu Changes the value of the high- lighted item.
  • Page 75 See ”Picture” on page 66 Selects the highlighted item. If there Selects the previous is an arrow in the item, this button menu. goes to that menu. Moves through the items in a menu. In some menus, Position Position, these button control up- down movement.
  • Page 76 6.2 Menus Structures: Picture The Picture menu has different items depending on the current source type. You cannot adjust Frequency in Digital pic- tures, so that item is not in the Picture menu when the selected source is Digital. You cannot adjust Horizontal Frequency in Analog, because that is determined by the source, so it is grayed out.

  • Page 77: Aspect Ratio

    Overscan: As with many rear projection televisions, Clarity Bengal uses overscan to ensure image quality. For video images, overscan is used to hide video artifacts such as the second audio channel or the sync information that is transmitted in the vertical interval.
  • Page 78 Memory: Recall In the Recall grid menu, use the arrow keys to navigate through the memories that have something stored in them. The empty memory slots are grayed out and you can’t land on them. Press to open the Recall ENTER detail menu.
  • Page 79 Memory: Save Press twice to SAVE open this menu directly. ENTER In the Save grid, use the arrow keys to cycle through the available memories. As you navigate through all 40 memories, Save Now will show (Overwrite), as shown here. For each empty memory, the Name of the memory is the default name for this slot.
  • Page 80 Audio Volume use the +/- keys on the remote to adjust volume. Mute turns off the volume. Loudness results in a 17dB boost of the base and a 4.5dB boost of the treble. Treble use the +/- keys on the remote control increase or decrease the treble response.
  • Page 81 Input Levels: Analog Sources For Digital Sources, see page 72. For Video Sources, see page 73. When the source is Analog 1 or 2 and has RGB color- space… (See 3.3 “What Does Colorspace Mean?” on page 36) To set levels semi-automatically, display a black picture from the source computer.
  • Page 82 Input Levels: Digital Sources When the source is Digital and the colorspace is RGB … (See 3.3 “What Does Colorspace Mean?” on page 36) The digital level controls are not often used, because most digital sources don’t need them. Reset is a button that will return the system to the default values for digital sources.
  • Page 83 Input Levels: Video Sources When the source is Composite or S-Video… The top items in the Input Levels menu, when the source is video, correspond to similar controls on television receivers (although PAL and SECAM receivers do not use a hue control). The Blue Only check box is for adjusting the picture with color bars from the source.
  • Page 84 Diagnostics: Display Status The Display Status menu shows the status of the lamp and fan. 573- is the firmware number. For Bengal it will be 5732200 Fan: On when running. When a fan fails, the lamp will not turn on and you can’t see this menu. Lamp:On when the lamp fails you can’t see this menu.
  • Page 85 Diagnostics: Serial Status Commands Received is the number of commands that have Bengal passed through this , whether or not they were addressed to it. Replies Sent is the number of replies this display sent. Last Packet Type will be, most commonly, an Event or an Operation.
  • Page 86 Diagnostics: Test Patterns The Test Pattern menu turns on a variety of internally generated test images. These block any incom- ing picture. Be sure to choose “None” when you are finished testing. Press four MONITOR times to open the Test Patterns menu.
  • Page 87 Diagnostics: Setup Summary You cannot change anything in this menu. It is for refer- ence only. The Setup Summary menu looks different for digital or video sources. Slot is only visible when the current settings are exactly the ones in a numbered memory slot.
  • Page 88 Diagnostics: Hours System Time is the number of hours and minutes the electronics module has been running, that is,how long it has had power applied to it. Running Time is the amount of time the optics have the lamp on, that is, how long light has gone Bengal through the optical parts of the Lamp is supposed to be the amount of time the lamp...
  • Page 89 Advanced Options: Miscellaneous Options Curtain Pattern is a choice of any of the solid color test patterns or the logo. This is displayed when you press or when there is no source. CURTAIN Plug and Play enables the Extended Display Identification Data (EDID) that is used by many computers to determine the capabilities of the monitor.
  • Page 90 Advanced Options: Color Balance Match the whites Use color balance to match all the displays in a group. Reset values on all displays to numbers shown in top illustration with white test pattern. Match all displays to least bright display. Change the Blue value as little as possible.
  • Page 91 Advanced Options: Lamp Settings Auto Lamp On, when checked, turns on the lamp shortly after AC power is restored. When Bengal not checked, the waits for a Lamp On command from the remote or from RS232. CAUTION The lamp must cool down for about one minute before lighting again.
  • Page 92 Advanced Options: Serial Port Settings Group ID can be 0-9, A-Z (caps only) Unit ID can be 0-9, A-Z (caps only) In combination this gives 1296 unique IDs. The ID is the identification of the individual display. The address is the part of an RS232 that specifies which display or displays should execute the command.
  • Page 93 Advanced Options: Auto Setup Options The checked events occur when • the input changes, say from XGA to UXGA • a new source is selected • you press the button. SOURCE Retry on lost signal, when checked, means the Bengal will look for a valid picture on the other connectors whenever sync on the current con- Bengal...
  • Page 94 Advanced Options: Image Alignment Pan Image moves the entire image vertically or horizontally. Shrink/Grow allows you to shrink or grow the image, all sides proportionally Test Pattern allows you to choose the Grid pattern, the alignment pattern or none. Reset to Default resets the image to factory reso- lution.
  • Page 95 Menu Options: Position From the Main Menu, select Position to access the Picture Position menu. For more information on positioning and aligning the image See 3.1 “Aligning the Image” on page 22. Press the to access the PIcture SIZE Position menu directly...
  • Page 96 Advanced Options: Menu Options H and V Position move the location of the menus on the screen. Menu Timeout sets how long menus will remain on the screen before disappearing on their own. The choices are 5, 15, and 60 seconds, and Never Time Out, which keeps the menu on indefinitely.

  • Page 97: Program Information

    Program Information The middle section shows the native resolution of the Bengal and the Revision number of the firmware.

  • Page 98: Analog Mode Tables

    6.3 Analog Mode Tables Analog Modes in Horizontal Resolution Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels APP0560/APP0560B 60.1 APP0560/APP0560B (alt) 60.1 PW0660 60.3 DMT0685D/DMT0685F (alt) 85.1 IBM0770/PW0670 (alt) 70.1 NEC0656D 56.4 DMT0685D/DMT0685F 85.1 IBM0770/PW0670 (alt) 70.1 IBM0660/IBM0660D (alt)
  • Page 99 Analog Modes in Horizontal Resolution Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels PW0872 1040 DMT0860 60.3 1056 PW0880 1056 DMT8085 85.1 1048 PW0890 1056 PW08100 1072 PW08110 1072 PW08120 1088 DMT0872 72.2 1040 APP0875 75.1 1120...
  • Page 100 Analog Modes in Horizontal Resolution Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels IBM1043_ 1056 43.5 1280 NEC1140B 1120 1456 DMT1175 1152 1600 DMT1185 1152 1576 DMT1170 1152 1480 APP1175 1152 75.1 1456 SUN1166X/1166_ 1152 1504 SUN1176X/1176_...
  • Page 101 Analog Modes in Horizontal Resolution Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels r1080p60/r1080p59 1920 1080 2200 1080p30 1920 1080 2200 r1080p24 1920 1080 2750 PW1960 1920 1200 2112 PW1955 1920 1200 2112 PW2046 2048 1536 2240...
  • Page 102 Analog Modes in Mode ID Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels IBM0770/PW0670 70.1 DMT0675 IBM0660/IBM0660D (alt) 59.6 IBM0660/IBM0660D 59.6 DMT0685 DMT0672 72.8 IBM0675 APP0667/APP0667_ 66.6 APP0667/APP0667_ (alt) 66.6 61.2 SMT0760/480p/480SH/480p_ (alt) 59.9 SMT0760/480p/480SH/480p_ (alt) 59.9 SMT0760/480p/480SH/480p_...
  • Page 103 Analog Modes in Mode ID Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels APP1075 1024 74.9 1328 IBM1070 1024 1368 SUN1077 1024 77.1 1360 IBM1076 1024 75.8 1408 SNY1072 1024 71.8 1296 DMT1070 1024 70.1 1328 DMT1060_1...
  • Page 104 Analog Modes in Mode ID Order Horiz Vert V Freq Total H Mode Name Mode ID Interlace (Hz) Pixels PW1272 1280 1024 1728 DMT1285G 1280 1024 1728 PW1280 1280 1024 1744 SUN1267G/1267_ 1280 1024 66.7 1648 SUN1267G/1267_ (alt) 1280 1024 66.7 1632 HWP1272G...

  • Page 106: Bengal Drawings

    6.4 Bengal Drawings Dimensions in inches Bengal Front View...
  • Page 107 Rear View Left Side View LCD Display Signal Input Panel...

  • Page 108: Connector Wiring

    6.5 Connector Wiring These are connector diagrams with pin designations. All connectors on these pages are shown looking at them from the outside, not from the solder side. These diagrams look at the outside of the connec- tor, as the cable sees it, not the wiring side. RS232 adapter DB15 standard VGA connector The wiring shown for this...

  • Page 109: Dvi Connector

    DVI Connector Signal Signal TMDS data 2- TMDS data 3+ TMDS data 2+ +5 V power TMDS data 2/4 shield Ground (for +5V, Hsync, Vsync) TMDS data 4– Hot plug detection TMDS data 4+ TMDS data 0– DDC clock TMDS data 0+ DDC data TMDS data 0/5 shield Analog vertical sync...
  • Page 110 Signal Chrominance 0.3 V burst 75 ohms...

  • Page 112: Regulatory Information

    The typical use is in a conference room, meeting room or auditorium Note: Any changes or modifications to the display not expressly approved by Clarity Visual Systems could void the user's authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class A limits of Part 15 of FCC rules.

  • Page 114: Meaning Of Terms

    Bay Cat The name for a Clarity direct-view LCD display, similar to a Clarity Bobcat, H & V sync Horizontal and vertical sync on two but with a larger screen (46”) and...
  • Page 115 See also video. Also called SOG. PAL and SECAM. Tigress The name for any Clarity model begin- The television system used in most of ning with WN-5230. The original the world. It stands for Phase Alterna- Tigress, no longer produced, has tion Line.
  • Page 116 Term Meaning Wildcat The name for any Clarity model begin- ning WN-4030. WXGA Wide XGA, a standard for distributing analog computer pictures with a res- olution of 1280 pixels by 768 pixels. eXtended VGA, a standard for distrib- uting analog computer pictures with a resolution of 1024 pixels by 768 pix- els.

  • Page 118: Specifications For Bengal

    6.8 Specifications for Bengal Mechanical Specification Maximum Minimum Typical Notes Outside dimensions " Width 139.45 cm 54.9 " Height 116.8 cm " Depth 15.86 cm 6.25 " Pedestal height 37.47 cm 14.75 Weight, fully assembled 116 lb 52.62 kg Shipping weight Orientation 10°...
  • Page 119 Electrical and Heat Specification Maximum Minimum Typical Notes Frequency, vertical 85 Hz 56 Hz Frequency, horizontal 91.1 kHz 31.47 kHz Dot clock 165 MHz AC requirements Line voltage 115 VAC range 132 VAC 190 VAC 110 VAC 45–65 Hz auto-ranging, power factor corrected 230 VAC range 254 VAC...
  • Page 120 Optical Specification Maximum Minimum Typical Notes Luminance <0.2FL Internal Black field test pattern Non-Uniformity <20% Internal Black field test pattern Color Display Color Bit Depth 24 Bits Saturation (EBU) 100% Color Point -White 0.305 0.335 Color Point -Red 0.650 0.330 Color Point -Green 0.320 0.640...

  • Page 123: Index

    A B C D E F G H I J K L M N O P Q R S T U X Y Z Index Numbers color balance menu 4×3 aspect ratio, definition of color balancing 9-pin to RJ45 adapter color bars, adjusting video with colorspace AC power requirements...
  • Page 124 A B C D E F G H I J K L M N O P Q R S T U X Y Z fast key, definition of last fault FCC regulations last packet address feedback about this manual last packet type fill all LEDs firmware, revision, number of...
  • Page 125 A B C D E F G H I J K L M N O P Q R S T U X Y Z model number, location of remote control module, definition of arrow keys monitor menu chain curtain most recent fault enter mullion freq/phase...
  • Page 126 A B C D E F G H I J K L M N O P Q R S T U X Y Z source video button composite, definition of definition of definition of selecting input amplitude source, computer, adjusting to input module, definition of source, digital, adjusting to Video Controls...
  • Page 127 LU0243012 If you can’t contact your reseller for some reason, Describe the problem Clarity’s contact information is on the back cover of Try to describe the problem in the most precise lan- this manual. guage you can. Remember, the person you are talking to or writing to can’t see what you see.
  • Page 128 ©2004 Clarity Visual Systems, Inc. All rights reserved 27350 SW 95th Avenue, Suite 3038 Wilsonville, OR 97070-7708 Main Phone: +1 503 570 0700 • Customer Service Phone: +1 503 570 4634 • Fax: +1 503 570 4657 www.ClarityVisual.com • Service@ClarityVisual.com...

Table of Contents