Mac Filter - SmartRG SR300n User Manual

MAC Filter

Also known as Layer 2 address filtering, MAC Filtering refers to an access control methodology whereby the 48-bit address as-
signed to each LAN host NIC is used to determine access to the network.
After selecting Wireless -> MAC
Next, select the MAC Restrict Mode
Use the Add button to add a MAC address to the filter list.
Click Apply/Save to commit the completed entry.
The individual fields on this screen are defined as follows:
Field Name
Select SSID
MAC Restrict Mode
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Filter from the left navigation bar, select an SSID to filter from the drop-down list.
(Disabled, Allow or Deny).
Description
Select the SSID to apply this MAC filter rule to.
Disabled: MAC filtering is off.
Allow: For specified MAC address, access is permitted.
Deny: Access for the specified MAC address is rejected.
Page 93
smartrg.com