Advanced Setup; Layer2 Interface; Atm Interface - SmartRG SR300n User Manual

ADVANCED SETUP

Layer2 Interface

ATM Interface

From this screen you can configure Asynchronous Transfer Mode / Permanent Virtual Conduit for your gateway. You can custom-
ize latency options, Link Type, Encapsulation mode and more. Note that devices (routers) on both ends of the connection must
support ATM / PVC.
ATM is becoming popular as a wide-area network (WAN) medium. ATM offers small cell size and strict quality of service, allowing
voice, video, and data to coexist.
Terms:
VPI – Virtural Path Identifier
VCI – Virtual Circuit Identifier
VC – Virtual Circuit
After selecting Advanced Setup -> Layer2 Interface -> ATM Interface
following screen will appear. When your desired settings have been declared, click the
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
from the left navigation bar, click
Apply/Save button to commit your changes.
Add in the center pane. The
Page 25
smartrg.com