Manual Setup; Network Authentication: 802.1X - SmartRG SR300n User Manual

Manual Setup

Network Authentication: 802.1X

The individual fields on this screen are defined as follows:
Field Name
Select SSID
RADIUS Server IP address
RADIUS Port
RADIUS Key
WEP Encryption
Encryption Strength
Current Network Key
Network Key 1-4
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Description
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
Port 1812 for authentication is a standard for RADIUS authentication per the IETF
RFC 2865. Your RADIUS deployment may differ from this. Older servers may use port
1645.
(Optional)
Enter the encryption key (if required) to authenticate to the RADIUS Server specified
via the Server IP address above.
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
[1-4] Select which of the four keys from the list is presently in effect.
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Page 86
smartrg.com