DIAGNOSTICS
Diagnostics
Line performance diagnostic tools are supported by your SmartRG gateway. Three legs of the data path are included in the avail-
able tests: LAN connectivity, DSL connectivity and Internet connectivity tests.
After selecting
Diagnostics -> Diagnostics
from the left navigation bar, click the
Test
button at the bottom of the screen.
The table will be updated with fresh diagnostic information regarding connection integrity. There is significant in-line documenta-
tion regarding each individual test. Simply click the
Help
link at the far right of each line item to learn more about what is being
tested and what actions to take in the event that a particular test should fail.
The normal test method is initiated with the
Test
button and utilizes OAM F5 loopback cells.
Selecting the
Test With OAM F4
will conduct the test at the VP level in lieu of at an individual VC connection.
Page 100
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com