Security - SmartRG SR300n User Manual

Security

Utilize this screen to configure security features of the wireless LAN interface.
You may configuration it manually or via Wi-Fi Protected Setup (WPS).
After selecting Wireless -> Security from the left navigation bar you may modify settings as desired.
Click Apply/Save to commit your settings.
Note: When both STA PIN and Authorized MAC are empty, PBC becomes the default value.
If Hide Access Point is enabled or the MAC filter list is empty with "allow" chosen, WPS2 will be disabled.
Page 83
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014 smartrg.com