Fault Management - SmartRG SR300n User Manual

Fault Management

Utilize this screen for diagnostics regarding your VDSL PTM or Ethernet WAN connection.
Fault Management is compliant with IEEE 802.1ag for Connectivity Fault Management.
After selecting Diagnostics -> Fault Management
Level, Destination MAC Address
The individual fields on this screen are defined as follows:
Field Name
Maintenance Domain (MD) Level
Looback Message (LBM)
Maintenance End Point (MEP)
Linktrace Message (LTM)
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
from the left navigation bar, select values for the
to test and enter the applicable (if any)
Description
[0-7] Maintenance Domains are management space on a network, typically owned
and operated by a single entity. MDs are configured with Names and Levels, where
the eight levels range from 0 to 7. A hierarchical relationship exists between domains
based on levels. The larger the domain, the higher the level value.
Used on-demand as the first step to isolate a fault.
Points at the edge of the domain, defines the boundary for the domain.
Identifies all maintenance points in the entity.
802.1Q VLAN ID.
Reference IEEE 802.1ag for additional details.
Maintenance Domain (MD)
Page 101
smartrg.com