Manual Setup; Network Authentication: Wpa - SmartRG SR300n User Manual

Manual Setup

Network Authentication: WPA

WPA Authentication requires the same set of parameters as used with 802.1X with but with the two parameters added:
Group Rekey Interval and WEP
The individual fields on this screen are defined as follows:
Field Name
WPA Group Rekey Interval
WPA/WAPI Encryption
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Encryption. Reference the above table for field descriptions not found in the table for WPA below.
Description
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
[AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu-
lated with the option most complimentary to the Network Authentication selected.
WPA
Page 87
smartrg.com