ETH Interface
Your gateway has four LAN ports. One of them can be re-purposed to become a WAN port when such an RJ45 WAN port is desired.
After selecting
Advanced Setup -> Layer2 Interface -> ETH Interface
following screen will appear. From the drop-down menu in the center pane, simply select the LAN port you wish to act as a WAN
port.
WAN Service
There are several variations of WAN Service available to configure. The three core variations are:
•
PPP over Ethernet (PPPoE)
•
IP over Ethernet
•
Bridging
This chapter will illustrate a sample configuration scenario down each of these three variations and define the available fields to
customize your WAN service setup.
PPP over Ethernet
After selecting
Advanced Setup -> WAN Service
will follow. Advance to the next after completing the required fields using the
screen.
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
from the left navigation bar, click
from the left navigation bar, click the
Add
in the center pane. The
Add
button. A progression of several screens
Next
button appearing near the bottom of each
Page 29
smartrg.com