SmartRG SR300n User Manual page 84

The individual fields on this screen are defined as follows:
Field Name
Enable WPS
Enter STA PIN
Use AP PIN
Set Authorized Station MAC
Set WPS AP Mode
Device PIN
Network Authentication
Note that many of the fields in the Manual Setup portion of the screen vary based on the choice of Network Authentication.
Each variation is presented below.
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
Description
[Enabled, Disabled] Enables Wi-Fi Protected Setup.
Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the
desired radio button then click the "Add Enrollee" if necessary to add a specific, en-
rollee station.
If both the PIN field and Set Authorized Station MAC are left blank, the PBC (push-
button) mode is automatically made active.
When manually pairing via WPS, enter the MAC address of the client device you are
trying to connect.
[Configured, Unconfigured] Select Configured to have the gateway assign security
settings to clients. Select Unconfigured when you wish to have an external client as-
sign security settings to your SmartRG gateway.
(Auto generated by the access point.)
Select the desired network security authentication type.
Page 84
smartrg.com