Completing The Installation; Replacing The Cover - IBM IntelliStation M Pro Type 6868 User Manual

Completing the installation

After working with options, you need to reinstall any removed parts,
replace the cover, and reconnect any cables, including power cords and
telephone lines. Also, depending on the option installed, you might need to
install device drivers or update information in the Configuration/Setup
utility program. Refer to the documentation that comes the option.

Replacing the cover

1. Ensure that all components have been reassembled correctly and that
no tools or loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Install the side cover by placing it into position and sliding it to the
rear as shown in the following illustration. Make sure the cover is
latched into position.
92
IntelliStation User Guide