Starting The Cd; Using The Software Selections Program - IBM IntelliStation M Pro Type 6868 User Manual

Starting the CD

To use the IBM Software Selections CD, insert the CD into your CD-ROM
drive. The Software Selections program starts automatically.
If the auto-run feature is disabled in your computer:
1. Click the Windows Start button; then click Run.
2. Type e:\swselect.exe where e is the CD-ROM drive letter.
3. Press Enter. The Software Selections menu appears.
4. Select the desired option; then follow the instructions on the screen.
or
1. In Access IBM, click Customize. (For information about opening
Access IBM, see "Using Access IBM" on page 18.)
2. In the Customize menu, click Install Software.
3. When prompted, insert the IBM Software Selections CD into the
CD-ROM drive.
After a program is installed, you can access it through the Programs choice
on the Windows Start menu. For most programs, support documentation is
built into the online Help system; for some, online documentation is also
provided.

Using the Software Selections program

A Software Selections program is provided on the Software Selections CD.
To use the Software Selections program:
1. In the Software Selections menu, click the check box next to each
program you want to install.
2. After selecting the software, click Install. A window opens showing
the software programs that will be installed. Click OK to continue
with the installation process or click Cancel to reset your options.
3. To complete a task, make the applicable selections and follow the
instructions on the screen.
138
IntelliStation User Guide