IBM IntelliStation M Pro Type 6868 User Manual page 88

Before you begin
Turn off the computer and all other connected devices.
Disconnect all cables attached to the computer and remove the
cover (see "Disconnecting cables and removing the cover" on
page 64).
Attention: The presence of 5 V standby power might result in
damage to your hardware unless you disconnect the power cord
from the electrical outlet before opening the computer cover.
1. To locate the RIMM connectors inside your computer, see "Locating
system board components" on page 69.
2. At both ends of the RIMM connector, push outward on the retaining
clips until the RIMM is loosened. Lift the RIMM out of the connector.
Note: Be careful not to push too hard on the retaining clips, because
the RIMM might eject too quickly.
3. Store the RIMM in a static-protective package.
72
IntelliStation User Guide