Starting Your Computer - IBM IntelliStation M Pro Type 6868 User Manual

Starting your computer

To start your computer:
1. Turn on all devices connected to the computer.
2. Press and release the power switch on your computer.
What you see and hear when you start up your computer depends on the
features installed and the BIOS settings.
If POST detects an error you hear multiple beeps (or no beep) and an error
message appears on the screen. Write down any error numbers and
descriptions. If a problem is detected, see Chapter 6, "Troubleshooting" on
page 97 for more information.
When POST completes, the following message appears:
Press F12 to boot from the network
Press F1 for Configuration/Setup
Chapter 3. Operating and caring for your computer
27