IBM IntelliStation M Pro Type 6868 User Manual page 92

1. See the system board label inside your computer for the location of the
terminator and secondary microprocessor socket (secondary CPU).
2. Read the instructions that come with the new microprocessor.
3. Push outward on the retainers on each end of the terminator card while
pulling the card out of the socket.
4. Remove the terminator card from the secondary microprocessor socket.
5. Remove the microprocessor from its static-protective package and insert
it into the guides. Push the microprocessor into the socket until it is
properly seated.
Notes:
1. If you add a second microprocessor that runs at a different speed than
the primary microprocessor, both will run at the speed of the slowest
one.
2. The Configuration/Setup Utility program runs automatically after the
computer is restarted.
What to do next
To work with another option, go to the appropriate section.
To complete the installation, go to "Completing the installation" on
page 92.
76
IntelliStation User Guide