Table of Contents
Advertisement
B.3
New Project Setup
B.3.1
Creating a New Project
1. Launch Code|Lab EDE for .NET.
2. On the Start Page, select "New Project".
a. The "New Projects" window appears.
b. Select "Code|Lab Projects" under Project Types and name the project "Project80333" in
the name field.
Note: The directory "Project80333" is created under the path specified in the Location box.
c. Click OK.
3. In the Code|Lab EDE Project Wizard Window:
a. Select "RedHat GNU Tools for XScale" under "Build Toolset".
b. Select 80333 under "Project Template".
c. Select "Application" under "Project Type".
d. Click "Finish".
4. Close the "Start Page" by clicking on the X in the top right corner of the Start Page window.
5. The new project is now in the "Solution Explorer" window. When this window is not open,
open it by "View, Solution Explorer".
6. Right click on "Project80333" and select "Save Project80333".
7. From http://developer.intel.com/design/iio/swsup/Tester1LED.htm, download the following
zip file (.../Tester1LED) from the Software Support section, containing the example code files
to the newly created project folder:
Tester1LED.zip
blink.c
blink.h
led.c
led.h
These files can be placed in any directory on the hard drive.
8. Add the newly downloaded files to the project:
a. In the "Solution Explorer" window, right click on "Project80333" and select "Add, Add
Existing Item".
b. In the "Add Existing Item" window, use the drop-down menu under "Look In" to find the
four files listed in step 7 on the hard drive. Select all four files and click "open". The
"Solution Explorer" window now shows these files under "Project80333".
Customer Reference Board Manual
Intel® IQ80333 I/O Processor
Getting Started and Debugger
57
Advertisement
Table of Contents
