Intel IQ80333 Reference Manual page 22

Intel® IQ80333 I/O Processor
Getting Started
To bring up a HyperTerminal session on a Win32 platform: Go to Start, Programs, Accessories,
Communications, HyperTerminal
•
HyperTerminal setup screens:
— "Connection Description" Panel:
•
— "Connect To" Panel:
•
— Port Settings:
•
•
•
•
•
— Start HyperTerminal:
•
— Reset or power up IQ80333.
— The Host screen reads:
RedBoot(tm) debug environment - built dd:mm:yy, Mon dd 2004
Platform: 80333
Copyright (C) 2004, RedHat, Inc.
RAM: 0xa0000000-0xa2000000
FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.
IP: 192.168.0.1, Default server: 0.0.0.0
RedBoot>
For further information on the GDB/Insight Debugger, refer to the content of the GNUPro CD and/or
the GNUPro Debugging Tools manual. This setup assumes that RedBoot is Flashed on the board.
22
Enter name.
Select host com2 port (or whichever port you are using).
Bits per second: 115200
Data Bits: 8
Parity: none
Stop Bits: 1
Flow Control: none
Select Call from HyperTerminal panel.
Customer Reference Board Manual