Hardware Setup
2-2 Power-On by Keyboard Function Jumper JP50
Enable the Wake-Up by Keyboard function by Shorting pin 2-3 on
jumper JP50, otherwise, short pin 1-2 to disable this function.
Jumper JP50 can be easily identified by its red color cap.
Support Wake-Up
by Keyboard
JP50 Setting
2-3 Auto Detect CPU Voltage
Note: You do not need to set any jumpers since this
motherboard auto detects the Pentium
voltage.
This motherboard is designed to automatically detect the CPU
voltage. Therefore, it is not necessary to set any jumpers on the
motherboard.
Enable
5VSB supports
Wake-up by
Keyboard
VCC does not
1
support Wake-up
2
by Keyboard
3
29
SY-6BB
Disable
®
II processor
1
2
3