SOYO SY-6BB User Manual page 14

Quick Installation Guide
Step 2. CPU Fan Installation
®
Your Pentium
fan on the processor according to the instructions provided by the
manufacturer. The fan is a key component that will ensure system
stability. The fan prevents overheating, therefore prolonging the life
of your CPU.
Note: Remember to connect the fan to the appropriate power
source.
Step 3. CPU Frequency Setting
This motherboard does not use any jumpers to set the CPU
frequency, CPU settings are changed through the BIOS. Refer to
Chapter 2 Hardware Setup and Chapter 3 BIOS Setup Utility for
details on how to set the Pentium
Step 4. DRAM Module Installation
This motherboard supports DIMM banks from 8 to 128 MB.
Note: Always install the memory module DIMM bank 3 first,
then install additional memory modules in DIMM banks of
decreasing order (3à2à1). Refer to the memory
configuration table in Chapter 2.
Refer to Chapter 2 Hardware Setup for details on how to install
memory modules in DIMM banks.
Step 5. IDE Device Installation (HDD, CD-ROM)
This motherboard offers two primary and secondary IDE device
connectors (IDE1, IDE2.) It can support up to four high-speed HDD
or CD-ROM.
II processor kit comes with a cooling fan. Mount the
®
II processor frequency.
11
SY-6BB