Quick Installation Guide
2. Parallel Port PRT1
This parallel port is used to connect the printer or other parallel
devices.
Your motherboard comes with one 25-pin female external parallel
connector with 25-pin flat cable.
Plug the 25-pin end of the flat cable into the PRT1 parallel connector
on the motherboard, as shown in the figure below, then fix the
external 25-pin connector to the rear panel of the computer case.
Then plug your parallel device cable directly into the 25-pin female
connector located at the back of your computer.
PS/2 Mouse
Connector
1
1
1
PRT 1
FDC
COM 1
COM 2
25-pin parallel
flat cable
KB
Connector
16
SY-6BB
25-pin female external
parallel connector