SOYO SY-6BB User Manual page 63

BIOS Setup Utility
3-8.3 FDC Controls
FDC Controls
Onboard FDC controller
3-8.4 Onboard Serial Ports
Onboard Serial
Ports
Onboard PORT 1
Onboard PORT 2
UR2 Mode
If [UR2 Mode] is set to [IrDA 1.0]/[ASKIR]/[FIR]
UR2 Duplex Mode
Setting
Disabled Turn off the on-board
Enabled Use the on-board
Setting
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Standard
IrDA 1.0
ASKIR
FIR
Half
Duplex
60
Description
floppy controller
floppy controller
Description
Choose serial port 1 & 2's
I/O address.
Do not set port 1 & 2 to
the same address except
for Disabled.
Supports a Standard
serial infrared IrDA.
Supports a Sharp
serial interface format.
Fast Infrared Interface
Choose [Half] or
[Duplex] to set UR2 in
half duplex mode or
full duplex mode
respectively. Refer to
your IR device
specifications to select
the suitable mode.
SY-6BB
Note
Default
Note
Default
Default
Default
Default