SOYO SY-6BB User Manual page 15

Quick Installation Guide
Connect one side of the 40-pin flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary [IDE1] or secondary
[IDE2] directionally keyed IDE connector on the motherboard.
This motherboard can support up to four HDDs.
Step 6. Floppy Drive Installation
The system supports 5 possible floppy drive types: 720 KB, 1.25 MB,
1.44 MB, 2.88 MB, and LS-120. In addition, this motherboard
supports a 3-mode (720KB/1.25MB/1.44MB) floppy commonly used
in Japan.
Connect one side of the 34-pin flat cable to the floppy drive and plug
the other end to the floppy drive connector labeled [FDC] on the
motherboard.
This motherboard can support up to 2 floppy drives.
Step 7. Front Panel Connections
Reset
PWRBT
Turbo
LED
HDD LED
Power
LED
Keylock
_
Speaker
+
12
SY-6BB