SOYO SY-6BB User Manual page 25

Quick Installation Guide
SY-6BB
Step 14. AT Power Supply
If you are using AT power, plug the dual 6-pin headers from the
power directly into the 12-pin male AT Power connector on the
motherboard. Make sure the black leads of the 6-pin AT power
headers are in the center.
Step 15. CMOS Clearing (JP5)
After you have turned off your computer, clear the CMOS memory
by momentarily shorting pins 2-3 on jumper JP5, for a few seconds.
Then restore JP5 to the initial 1-2 jumper setting in order to recover
and retain the default settings.
Reset your computer now.
Step 16. Power-On by Keyboard Function (JP50)
This function allows users to wake up the computer through the
keyboard. To enable the Power-On by Keyboard Function, set JP50
to the 2-3 jumper setting. Shorting pin 1-2 on jumper JP50 will
disable the Power-On by Keyboard Function.
22