Hardware Setup
JPS2: PS/2 Mouse Function Jumper
Set PS/2 mouse function enabled or disabled.
Note:
The IRQ12 is dedicated to the PS/2 mouse when choosing
enabled of PS/2 Mouse Function.
JP70: Wide SCSI Loading Selection Jumper
If you connect more than 6 of the Wide SCSI device drivers, you need to
set the jumper JP70 closed to enhance the data signal to make
transmission more stable.
7~15 Devices Loading
PS/2 Mouse Function
Disabled
(default)
Enabled
Wide SCSI Loading
1~6 Devices Loading
(default)
JPS2
JP70
7