Installation Guide - SOYO SY-6BB User Manual

Quick Installation Guide
UNPACKING THE MOTHERBOARD
Like most electronic equipment, your motherboard may be damaged
by electrostatic discharge. To avoid permanent damage to
components ground yourself while working by using a grounding
strap. Otherwise ground yourself frequently by touching the
unpainted portion of the computer chassis to drain the static
charges.
Handle the motherboard carefully, holding it by the edges.
You are now ready to start the installation.

INSTALLATION GUIDE

We will now begin the installation of the motherboard. Please follow
the step-by-step procedure designed to lead you to a complete and
correct installation.
Step 1. CPU Installation
Your SY-6BB motherboard comes with a CPU retention set kit. The
retention set is used to hold the Pentium
the Slot 1 CPU connector on the motherboard.
Follow these instructions to install your Pentium
correctly.
1. Unpack the Retention Set Kit
Gather the following items included in the retention set kit, as shown
in the following figure:
Ø Supporting Base
Ø Support Clip
Ø Latches (x2)
Ø Screws (x2) used to set the retention clip
Ø Retention Clip
®
II processor attached to
5
SY-6BB
®
II processor