SOYO SY-6BB User Manual page 62

BIOS Setup Utility
3-8.2 Keyboard Controls
Keyboard
Controls
USB Keyboard
Support
Init AGP Display
First
POWER ON
Function
If [POWER ON Function] is set to [KB Power ON Password]
KB Power ON
Password
If [POWER ON Function] is set to [Hot Key]
KB Power ON
Password
KBC Input Clock 12 MHz
Setting
Disabled
Enabled
Disabled
Enabled
BUTTON ONLY Disables the Wake-Up
KB Power ON
Password
Hot Key
Enter (your
password)
Ctrl-F1~F12
Description
Turn off the on-board
IDE
Use a USB keyboard
If you choose to
initialize the AGP
Display card first,
instead of the PCI VGA
card.
by Keyboard function.
Enables you to wake-up
the system by entering
a password at the
keyboard.
You can wake-up the
system by pressing the
key combination of your
choice (Ctrl-F1~F12).
Set the password that will wake-
up your system.
Choose the key combination
that will wake-up the system.
[Ctrl-F1 to Ctrl-F12]
Controls the frequency
of the clock signal of the
keyboard.
Set this value to 8MHz if
experience problems
with your keyboard.
59
SY-6BB
Note
Default
Default
Default
Default